How To Apply Semi Cured Gel Nail Sticker for Beginers?

When starting out with semi-cured gel stickers, it's advisable to focus on the basics for the Beginners. Adding extra products or techniques can come later with Base Coat, if necessary, but for most people, these additional steps are not required. In general, the best practice is to apply the gel stickers directly onto the natural nail for optimal adhesion.

1. Push back cuticles using a Wooden Sticker.
2. Wash your hands with dish soap to remove oils from the hands and nails.
3. Use the file included in the Gel Nail Kit to rough up the nail plates. Gently buff the nail plates, making them feel rough to the touch. This helps with better adhesion. Avoid buffing nails smooth before starting.
4. Wipe your nails and fingertips with an alcohol wipe from the Gel Nail Kit and allow them to air dry.
5. Apply the Gel nail Sticker, pressing them down firmly onto the nail plates. Trim any excess strip length using nail clippers. It's not necessary to achieve a perfect cut at this stage; you will file them later for a smooth finish.
6. Using your finger, rub the edges of the strips multiple times to taper them nicely.
7. Cure the Gel Nail Sticker using a UV or LED lamp. Perform 2-3 cycles of 60-second curing until they are fully cured. If you are using the free Ohora lamp, ensure to hold the button down for a long press to activate a 60-second curing cycle. Pressing the button quickly may result in under-curing due to the shorter cycle.
8. A Devil J Collection Magic top coat or ohora Top Gel that adds professional shine and diamond strength to your gel nail stickers and warps.
9. Apply Top Gel on top of cured nail strips. 
   ※ Use a thin coat and brush in careful strokes to avoid getting gel on surrounding skin.
10. Cure gel 2 - 3 times under the UV Gel Lamp

https://higorgeous.com.au/

TIPS FOR SEMI-CURED GEL STICKERS!!!!

It is crucial to avoid applying Gel Nail Stickers in direct sunlight, or exposing and Storage unused stickers under UV and Sunlight. Whether it's the UV rays emitted by your nail lamp or sunlight, any exposure to UV rays can damage the Gel Nail Stickers and other gel products you have. Therefore, always ensure that you work in a shaded area and keep unused gel stickers protected from any source of UV light. This precaution will help maintain the integrity and quality of the gel strips and your other gel nail products.

It is important to avoid applying gel products, including gel stickers, outside, in a car, or in front of a window. Instead, always ensure that you have adequate artificial lighting, such as light bulbs, to properly see and work with the gel products. This precaution helps to maintain the quality and effectiveness of the gel application process. By using artificial light, you can ensure optimal results and avoid any potential issues that may arise from exposure to natural sunlight.

After completing a Gel Nail Stickers, it is crucial to avoid certain activities to allow the adhesive to set properly. Here are the revised instructions:

1. Do not shower, swim, bathe children, or do dishes immediately after applying Gel Nail Stickers.
2. Avoid prolonged exposure to water for at least 6 hours to ensure proper adhesion. It is fine to wash your hands, but try to minimize the amount of time your hands are submerged in water.
3. It is recommended to do dishes and take a bath before applying the Gel Nail Stickers to prevent prolonged exposure to water afterward.

By following these guidelines, you can help the gel strips to set effectively and prolong the longevity of your manicure.

https://ohora.com/